The product is a new saving-energy switch, it adopts a good sensitivity detector and integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from humans as the control-signal source, it can start the load at once when one enters the detection field. It can identify day and night automatically. It is easy to install and is used widely.
SPECIFICATION:
Power Source: 220 -240V/AC
Detection Range: 180°
Power Frequency: 50Hz
Working Temperature: -20~+40?
Ambient Light: 3-2000LUX (adjustable)
Working Humidity: <93%RH
Time-Delay: min: 10sec±3sec
Installation Height: 1.8m~2.5m
max: 8min±2min
Power Consumption: 0.45W (work)
Rated Load: 1200W (incandescent lamp) 0.1W (static)
300W(energy-saving lamp)
Detection Motion Speed?0.6~1.5m/s
Detection Distance: 5-12m (<24?) (adjustable)
FUNCTION :
? Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted to the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted to the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
? SENS adjustable: It can be adjusted according to using location; low sensitivity with 5m for
detection distance; high sensitivity with 12m, it fits a large room.
? Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).
? Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 8min±2min.
INSTALLATION :
? Switch off the power.
? Screw off the nail on the front cover. Open the wire hole. The power wire and the load wire are bored in the bottom.
? Fix the bottom on the selected position with the inflated screw.
? Connect the power and the load with the connection-wire column according to the connect-wire figure in the following part.
? Fix the front cover of the sensor, please screw the nail and switch on the power. So you can test it.
Quick Sense Innovations is a leading Manufacturer of Wall-Mount PIR Motion Switch 180` from Faridabad, India.
Read MoreThe product is a new saving-energy switch, it adopts a good sensitivity detector and integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from humans as the control-signal source, it can start the load at once when one enters the detection field. It can identify day and night automatically. It is easy to install and is used widely.
SPECIFICATION:
Power Source: 220 -240V/AC
Detection Range: 180°
Power Frequency: 50Hz
Working Temperature: -20~+40?
Ambient Light: 3-2000LUX (adjustable)
Working Humidity: <93%RH
Time-Delay: min: 10sec±3sec
Installation Height: 1.8m~2.5m
max: 8min±2min
Power Consumption: 0.45W (work)
Rated Load: 1200W (incandescent lamp) 0.1W (static)
300W(energy-saving lamp)
Detection Motion Speed?0.6~1.5m/s
Detection Distance: 5-12m (<24?) (adjustable)
FUNCTION :
? Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted to the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted to the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
? SENS adjustable: It can be adjusted according to using location; low sensitivity with 5m for
detection distance; high sensitivity with 12m, it fits a large room.
? Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).
? Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 8min±2min.
INSTALLATION :
? Switch off the power.
? Screw off the nail on the front cover. Open the wire hole. The power wire and the load wire are bored in the bottom.
? Fix the bottom on the selected position with the inflated screw.
? Connect the power and the load with the connection-wire column according to the connect-wire figure in the following part.
? Fix the front cover of the sensor, please screw the nail and switch on the power. So you can test it.
To: Quick Sense Innovations
Quick Sense Innovations
Rishabh bansal
165A, Ground floor, Ward no 5, bassa para, Olf faridabad
LOGIN AND GET CONTACT DETAILS.
Tell us more about your requirements so that we can connect you to the right service provider.
An easy way to post your sourcing requests and get quotes. One request, multiple quotes
Will connect you with best sellers & provide you best quotation. Verified suppliers matching. Quotes comparison and sample request
Your local business too needs brand management and image making. As you know the local market..
Join oursubscribers and get a new discount coupon on every Saturday.
We are now available on App Store & Google Play. Get it now.
Send your enquiry to this supplier