Design and manufacturing std.: As per manufacturer\'s standard

Construction: Ball type, soft seated

End connections: Flanged as per ansi b 16.5 (150)as per bs 10 (table die/f) and din std.

Valve Design : Bolted Bonnet Design 3 Piece Blow Out Proof Stem Ball Valve

Floating Ball : Up to 3\'\'

Size Range: 1/2\'\' to 8\'\'

Trunnion Ball : 4\'\' to 8\'\'

Size: 40 mm

Construction : 3 piece design, Single piece stem (spindle) Reinforced Ball, Teflon seated, full bore

Material: HDPE

End Connection: Flanged Ends to ANSI B16.5 RF 150

Face to Face: ANSI B16.10

Fire Safe Design : As Per BS 6755(part-11)/API 607 4TH Edition

Inspection and Testing Std : BS 6755(part-1)

Manufacturing Std: BS 5351

Rating : 150

Port Size: DN10-40

Body: LTB2/GM

Body Seal Ring, Valve Disc and stem: SS 410

Size: 1\'\' to 14\'\'

Manufacturing Std: API 600

End connection: Flanged and / or lugged to ANSI B 16.5 RF 150, Butt Weld Ends to ANSI B 16.5

Face to Face : ANSI B 16.10

Inspection Testing Std : API 598

Media: Air/Gas/Oil/Water/Chemical

Body Construction: Brass Forged /Aluminum/I.C./S.S.304

Coil Voltage: 12 V, 24 V, 48 V, 110 V, 220 V, AC/DC

Seat: Viton

Temperature of fluid: -5 deg C to 85 deg C (high temperature on request)

Easing Lever: CI

Body: Bronze

Media: Gas, water, steam

Spindle, Check nuts & screws: FB

Spring: SPS

Temperature range: -200 deg C + 600 deg C / -330 deg F + 1110 deg F

Construction: Flanged, trunnion mounted, full and reduced bore ball valve

Face to face: ASME B 16.10

Pressure ratings: EN PN 10-100, ASME 150-600

Size: 3/8 (10 mm) to 2\'\' (50 mm)

Fluids : Air, Inert Gas, Oil, Steam, Water

Connection : BSP

Operation : Handwheel

Construction : Weir type design, Soft seated, Raising stem

Design and Manufacturing STD: As per Manufacturer\'s Standard

End Connections: Flanged as per ANSI B 16.5 (150 )as per BS 10 (Table DIE/F) & DIN STD

End connection: Flanged Ends to BS 10 Table-D

Face to Face: BS 5156/ANSI B 16.10

Inspection and Testing std: BS 6755(part-1)

Manufacturing std : BS 5156

Rating : PN 10

Size: 1/4 Inch

Material: Bronze

Max. temp. Tested: 500 psig

Ends: Air, Water, Oil, Gas, Chemical and Steam

Maximum Inlet Pressure: C.I. Body - 14 kg/cm2, WCB / S.S. Body - 21 kg/cm2

Media: Flanged Ends

Pressure Adjusting Range : 1 - 7 kg/cm2, 4 -12 kg/cm2 (1 kg/cm2 = 14.2 PSI)

Temperature Range: 80 deg (for water), 180 deg (for steam)

Media: Air, Gas, Water

Valve Size: 1" to 8" (25 mm to 100 mm)

Temperature : 180 deg C

Operating pressure: 4.5 to 7 bar

Working pressure: 12 bar max

Construction : Ball type, Soft seated

Design and Manufacturing STD: As per Manufacturer\'s Standard

End Connections: Flanged as per ANSI B 16.5 (180)as per BS 10 (Table DIE/F) & DIN STD

Size: 40 mm to 300 mm & Above

Butt weld end: Water/Lugged/Flanged

Disc: Solid Disc/Dual Shaft/Single Shaft

Modes Of Operation : Manual (Lever Operated) Gearing Operated Pneumatically Operated

Model: DEF-50

Power: 220 V

Valve Size: 2\'\'

Weight approx.: 12 kg

Length: 190 mm

Valve Size: DN40-DN600

Material: Stainless Steel

Pressure: Water

Port Size: 40 mm~600 mm

Power: Manual

Size: DN40-DN600

Flange Thickness: 16 to 27.5 mm

Size of Valve: 50 to 300 mm

Test Pressure Body : 2.4 MPa to 1.5 MPa

Flange Diameter: 165 to 445 mm

Size: 25 mm to 100 mm

Color: Silver and Yellow

Material: Stainless steel

Maximum Applied Pressure : 16 kgf/cm2 (1 kgf/cm2 = 14.2 psi)

Valve Body Testing Pressure : 21 kgf/cm2

Pressure Adjusting Range: 1 ~ 5 kgf/cm , 3 ~ 8 kgf/cm

Applied Temperature : -15 ~ 85 deg C

End connection : Screwed Ends to BSP (F) / NPT

Manufacturing std.: IS 122681 ISO 6552

Structure: Bucket

Oper. Temp. Range : -25 deg C to 250 deg C (depending on MOC)

Pressure Rating: PN 10 / PN 16(On Request)

Seat Leakage : Tight shut off

Magnetic coil: 24 V / 50 Hz

Operating current: 0.23 A (5.5 VA)

Pressure range : 1.4 to 13.8 bar

Temperature: 66 deg C max

Flow rate: 1.2 to 45.0 m3/h

Tri - Clamp Bodies: Electro Polished

PDV - S: Screwed End

PDV - T: Tri-clamp Body To ISO 2852-1933(e)

Screwed: Internal 0.2 to 0.4 Ra. External 0.8 Ra

Size: 1/2\'\' up to 12"(DN 15 up to DN 300)

End Connection: Screwed, Socket Weld, Flanged, Butt-Weld

Material: Cast Metal

Ambient temperature : -20 deg C to + 65 deg C

Operating pressure : 75 % of the scale value

Process temperature: Max 150 deg C

Length: 75 to 85 mm

Nominal Size: 15 to 20 mm

Thickness: 3 mm

Diameter: 19 mm to 25 mm