Dwyer Magnehelic Gauge Range 15-0-15 Inches
Product Details:
Minimum Order Quantity 12 Number
Model Name/Number DWYER 2330
Weight 750 G
Connection Type NPT
Brand DWYER USA
Connection Size 1/8 inch
Dial Size 4 inch / 100 mm
Dial Type Dry
Display Type Analog
Mounting Back
Pressure Range MM WC, PAC,INCH,CM,KPA,PSI
Pressure Type Differential Pressure
Use Pharmaceutical Industries
Dwyer Magnehelic Gauge Range 15-0-15 Inches
Dwyer 2330 Magnehelic Differential Pressure Gauge (15-0-15"w.c.)
Model: 2330
Bezel Provides Flange For Flush Mounting in Panel. Clear Plastic Face is Highly Resistant To Breakage. Provides Undistorted Viewing Of Pointer And Scale.
Dwyer 2330 MAGNEHELIC, DIFFERENTIAL PRESSURE GAUGE, 15-0-15
Precision Litho-Printed Scale is Accurate and easy to read.
Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
Pointer stops of molded rubber prevent pointer over-travel without damage.
"Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
Silicone Rubber Diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
O-Ring Seal For Cover Assures Pressure Integrity of case.
Dwyer 2330 Specifications
Service-Air And Non-Combustible,Compatible Gases,
May Be Used With Hydrogen
Pressures Must Be Less Than 35 PSI
Housing-Die Cast Aluminum Case And Bezel,With Acrylic Cover
Exterior Finish Is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test
Accuracy-±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM
±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C)
Pressure Limits--20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar)
MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar)
Enclosure Rating-IP67
Overpressure-Relief Plug Opens At Approximately 25 PSIG (1.72 bar), Standard Gages Only
Temperature Limits-20 to 140°F (-6.67 to 60°C)
-20°F (-28°C) With Low Temperature Option
Mounting Orientation-Diaphragm In Vertical Position
Process Connections-???" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back
Dimensions-4" (101.6 MM) Diameter Dial Face
What's included with the Dwyer 2330
Dwyer 2330 Magnehelic Differential Pressure Gauge (15-0-15"w.c.)
E-mail :
dpsharma74@yahoo.co.in,
dpengineers007@yahoo.co.in,
info.dpengineers@yahoo.co.in
Mr D.P.SHARMA
9871014210
WhatsApp number :9871014210,9268631221
Websites :
www.dpengineers.in
www.dpengineer.in
www.dpengineers.co.in
www.dpengineer.co.in
www.dpengineersindia.com
www.dpengineerindia.com
www.dpengineersindia.in
www.dpengineers.info
www.dpengineer.info
www.dp-engineers.com
www.dpengineerindia.in
www.dpengineersindia.net
www.dpengineersdelhi.co.in
www.dpengineersdelhi.com
www.dp-engineers.co.in
www.dpengineersdelhi.net
https:www.youtube.com/watch?v=3KaLJsSV8Wo
https:www.youtube.com/watch?v=-O3rEhEyOzM
https:www.youtube.com/watch?v=mHle_D9SPnM
https:www.youtube.com/watch?v=Rl9dB5Uhl-c
https:www.youtube.com/watch?v=aU-cQCztS2s
https:www.youtube.com/watch?v=F9efnoISLw0
https:www.youtube.com/watch?v=SiYNp51HXbg
https:www.youtube.com/watch?v=EcY986bScqE
https:www.youtube.com/watch?v=LRgGmwyt_d0
D.P.ENGINEERS is a leading Manufacturer of Magnehelic Gauge Range 15-0-15 Inches from Delhi, India.
Read MoreDwyer Magnehelic Gauge Range 15-0-15 Inches
Product Details:
Minimum Order Quantity 12 Number
Model Name/Number DWYER 2330
Weight 750 G
Connection Type NPT
Brand DWYER USA
Connection Size 1/8 inch
Dial Size 4 inch / 100 mm
Dial Type Dry
Display Type Analog
Mounting Back
Pressure Range MM WC, PAC,INCH,CM,KPA,PSI
Pressure Type Differential Pressure
Use Pharmaceutical Industries
Dwyer Magnehelic Gauge Range 15-0-15 Inches
Dwyer 2330 Magnehelic Differential Pressure Gauge (15-0-15"w.c.)
Model: 2330
Bezel Provides Flange For Flush Mounting in Panel. Clear Plastic Face is Highly Resistant To Breakage. Provides Undistorted Viewing Of Pointer And Scale.
Dwyer 2330 MAGNEHELIC, DIFFERENTIAL PRESSURE GAUGE, 15-0-15
Precision Litho-Printed Scale is Accurate and easy to read.
Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
Pointer stops of molded rubber prevent pointer over-travel without damage.
"Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
Silicone Rubber Diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.
O-Ring Seal For Cover Assures Pressure Integrity of case.
Dwyer 2330 Specifications
Service-Air And Non-Combustible,Compatible Gases,
May Be Used With Hydrogen
Pressures Must Be Less Than 35 PSI
Housing-Die Cast Aluminum Case And Bezel,With Acrylic Cover
Exterior Finish Is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test
Accuracy-±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM
±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C)
Pressure Limits--20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar)
MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar)
Enclosure Rating-IP67
Overpressure-Relief Plug Opens At Approximately 25 PSIG (1.72 bar), Standard Gages Only
Temperature Limits-20 to 140°F (-6.67 to 60°C)
-20°F (-28°C) With Low Temperature Option
Mounting Orientation-Diaphragm In Vertical Position
Process Connections-???" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back
Dimensions-4" (101.6 MM) Diameter Dial Face
What's included with the Dwyer 2330
Dwyer 2330 Magnehelic Differential Pressure Gauge (15-0-15"w.c.)
E-mail :
dpsharma74@yahoo.co.in,
dpengineers007@yahoo.co.in,
info.dpengineers@yahoo.co.in
Mr D.P.SHARMA
9871014210
WhatsApp number :9871014210,9268631221
Websites :
www.dpengineers.in
www.dpengineer.in
www.dpengineers.co.in
www.dpengineer.co.in
www.dpengineersindia.com
www.dpengineerindia.com
www.dpengineersindia.in
www.dpengineers.info
www.dpengineer.info
www.dp-engineers.com
www.dpengineerindia.in
www.dpengineersindia.net
www.dpengineersdelhi.co.in
www.dpengineersdelhi.com
www.dp-engineers.co.in
www.dpengineersdelhi.net
https:www.youtube.com/watch?v=3KaLJsSV8Wo
https:www.youtube.com/watch?v=-O3rEhEyOzM
https:www.youtube.com/watch?v=mHle_D9SPnM
https:www.youtube.com/watch?v=Rl9dB5Uhl-c
https:www.youtube.com/watch?v=aU-cQCztS2s
https:www.youtube.com/watch?v=F9efnoISLw0
https:www.youtube.com/watch?v=SiYNp51HXbg
https:www.youtube.com/watch?v=EcY986bScqE
https:www.youtube.com/watch?v=LRgGmwyt_d0
D.P.ENGINEERS
We, D.P.Engineers are a reputed name for Manufacturing Variety of Air Filters & Air Condioning Related Components.By providing clean air solutions to a large number of customers from power generation, refineries & petrochemicals, engineering, pharmaceuticals, food, beverages and allied industries, we have earned recognition in the market.The product range of industrial filters, we offer include Air Filter, Pre Filter, Fine Filter,Hepa Filter,Mini Pleat Hepa Filter,Bag Filter, Hi-Tem. Hepa Filter, Air Pipeline Filters, Gas Pipeline Filters, Liquid Pipeline Filters, Pocket Filters, Vacuum Filters, Hvac Filters, Wire Mesh Filter, Fuel Filters, Microvee Filter, activated carbon filters,Rod Type Filter,Rod Type Pre Filter,AHU UNIT,Air Curtain,Air Washer,Axial Flow Fan,Cellulose Paper Pad, Fan Coil Unit, Fresh Air Unit,Grill,Damper, Diffusers, Motorized Dampers, Acrylic Inclined Manometer,Magnehelic Gauge, Pass Box, Cooling Tower Fan Hub, Cooling Tower Motors, Cooling Tower Packing Pall Ring, Cooling Tower Sprinkler,Cooling Tower Fan, Cooling Tower Spray Nozzels,Cooling Tower PVC Fills,Air Shower,Laminar Flow Bench,Sampling Dispensing Booth Our company works under the leadership of Mr.D.P.SHARMA Phone 9268631221,9871014210 E-Mail. dpengineers300@yahoo.co.in, dpengineers007@yahoo.co.in,
WELCOME TO D.P.ENGINEERS - Delhi
Plot No. X/852, Chand Mohalla,Street No: 11 Gandhi Nagar Industrial Area,Nr Ramgareya Gurdwara, Delhi – 110031.
E-mail :
dpsharma74@yahoo.co.in,
dpengineers007@yahoo.co.in,
info.dpengineers@yahoo.co.in
Mr D.P.SHARMA
9871014210
WhatsApp number :9871014210,9268631221
Websites :
www.dpengineers.in
www.dpengineer.in
www.dpengineers.co.in
www.dpengineer.co.in
www.dpengineersindia.com
www.dpengineerindia.com
www.dpengineersindia.in
www.dpengineers.info
www.dpengineer.info
www.dp-engineers.com
www.dpengineerindia.in
www.dpengineersindia.net
www.dpengineersdelhi.co.in
www.dpengineersdelhi.com
www.dp-engineers.co.in
www.dpengineersdelhi.net
https://www.youtube.com/watch?v=3KaLJsSV8Wo
https://www.youtube.com/watch?v=-O3rEhEyOzM
https://www.youtube.com/watch?v=mHle_D9SPnM
https://www.youtube.com/watch?v=Rl9dB5Uhl-c
https://www.youtube.com/watch?v=aU-cQCztS2s
https://www.youtube.com/watch?v=F9efnoISLw0
https://www.youtube.com/watch?v=SiYNp51HXbg
https://www.youtube.com/watch?v=EcY986bScqE
https://www.youtube.com/watch?v=LRgGmwyt_d0
To: D.P.ENGINEERS
D.P.ENGINEERS
DPSHARMA
X/852,Chand Mohalla,Gandhi Nagar,Delhi-110031 (M)9871014210,9268631221
LOGIN AND GET CONTACT DETAILS.
Tell us more about your requirements so that we can connect you to the right service provider.
An easy way to post your sourcing requests and get quotes. One request, multiple quotes
Will connect you with best sellers & provide you best quotation. Verified suppliers matching. Quotes comparison and sample request
Your local business too needs brand management and image making. As you know the local market..
Join oursubscribers and get a new discount coupon on every Saturday.
We are now available on App Store & Google Play. Get it now.
Send your enquiry to this supplier