The product can turn on or turn off light according to ambient-light; Ambient-temperature and humidity can't affect it. It is not only convenient but also practical, it can control the load working only at night. For instance road light, garden light etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor.
The product is a new saving-energy switch; it adopts a good sensitivity detector and integrated circuit. It gathers automatism, convenience, safety, saving energy, and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and identify automatically day and night; its installation is very convenient and its use is very wide. It has functions of power indication and the detection indication
Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the "sun" position (max). It can work inthe ambient light less than 3LUX when it is adjusted on the "moon" position (min). As for the adjustment pattern, please refer to the testing pattern.
Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basic of the first time-delay rest.
Time–Delay is adjustable. It can be set according to the consumer's desire. The minimum time is 10sec±3sec(preferable time 60sec). The maximum is 7min±2min.
Switch off the power.
Turn clockwise the bottom-stand and take off it. The power wire cross the hole in the middle of bottm-stand.
The bottom-stand is fixed on the selected position with inflated screw.
Connect the power and the load into the connection-wire column of the sensor according to connection-wire diagram.
The sensor aimed at the mouth of bottom-stand and turned anti-clockwise.
This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit, and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication.
1.Power source: 110~130V/AC 220~240V/AC
2.Detection range: 180 degree
3.Detection distance: max.12m
4.Time-delay:10sec-7min
Detection field: The wide detection range is made up of up and down, left and right (see the following diagram), the detection range could be adjusted according to your desire, but the moving orientation in the detection field has great relation with the sensitivity.
Identify day and night automatically: The ambient light of ST09 could be adjusted according to your desire: when turning to SUN (max), it will work day and night, when turning it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to the testing way.
Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).
Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec±3sec, the maximum is 7min±2min.
Shut off the power.
Loosen the screw on the bottom lid, open the wiring hole, pass the wire of power and load through the bottom lid.
Fix the bottom lid with an inflated screw on the selected position.
Connect the power and load wire into the connection-wire column according to the connecting figure.
Put the sensor on the bottom lid, twist the screw tightly then electrify it and test it.
https://www.quicksense.in/collections/products/products/quick-sense-qs-09-180-220v-lux-time-adjustment-wall-mount-pir-motion-switch-with-light-energy-saving-automatic-sensor-white
The product can turn on or turn off the light automatically according to ambient light. Ambient temperature and humidity can't affect it. It is not only convenient but also practical; it can control the load working only at night. For instance road light, garden light, etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, and LDR Sensor.
Save energy and automate your home's lights, fans, and appliances and easy-to-use 24 Hour Plug-in Mechanical Timer. Just set your schedules and go, and you'll never worry if you left the lights on ever again.
Specifications:
*No loose parts. Pins for setting your schedule are built-in around the dial
*Programs repeat every 24 hours
*Use on lights, fans, coffee machines, and more
*Slim and compact
*Rating: 125VAC, 60 Hz, 1875W, 16A Tungsten & Resistive, 1/2HP
Simplify your Home and your Life
1) Save energy and automate your home with our 24-hour timers. With up to 24 On/Off programs every 24 hours, you can customize your home's lights, ceiling lights, aquarium, holiday decorations, Christmas lights, displays, and many more.
2) Our improved timer dial requires no removable pins to set the timer. Simply push down the pins to set your desired time range and your timer is ready to go! No more worrying about losing removable pins.
Switch the modes between cool and heat, control temperature by setting the temperature set value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when the temperature exceeds temperature limit or when sensor error.
Specification and size
Technical parameters
Can be directly connected, with small size, low power consumption, big operating temperature range, anti-interference ability, and so on. There are functions such as adjusting the time and countdown.
Rated Voltage | 220V-240V |
Power range | Power range 180-250V |
Resistive load switching capacity | 16A |
Contact | 1NO/1NC |
Power consumption | <2VA |
Display | LCD |
Switching frequency | 16 NO/16NC |
Switching frequency | 1min |
Timing range | 1MIN-168HOUR |
Temperature | -30- +75 degree |
Temperature | 95%RH |
The product adopts a good sensitivity detector and integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from humans as the control-signal source, it can start the load at once when one enters the detection field. It can identify day and night automatically. It is easy to install and is used widely.
Identify day and night automatically. Can adjust ambient light according to your desire: when turn to SUN (max), it will work in the daytime and at night. When turning to MOON (min), it will only work under less than 3LUX circumstances. As for Adjustment, please refer to the testing way.
Time delay is added continually: when it receives the second induction signal after the first inductor, it will compute time once more on the rest of the first time-delay basic (Set time).
Time-delay adjustment: it can be set according to your desire. The minimum is 10±3 sec; the maximum is 7±2min.
Turn off the power.
Moving the transparent vinyl cover that is at the bottom of the sensor.
Loosing the screws in the connection terminal, connecting the power and rated load to a connection terminal of a sensor according to the connection sketch map.
Tighten the screws; put the transparent vinyl cover into the original station.
Folding the metal spring of the sensor upwards, until they are in the "I" position with the sensor, then put the sensor into the hole or installation box that is in the ceiling, the size is similar to the item. Releasing the spring, the sensor will be set in this installation position.
After finishing the installation, the sensor could be connected to the power and testing it.
The product is a new saving-energy switch, it adopts a good sensitivity detector and integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from humans as the control-signal source, it can start the load at once when one enters the detection field. It can identify day and night automatically. It is easy to install and is used widely.
SPECIFICATION:
Power Source: 220 -240V/AC
Detection Range: 180°
Power Frequency: 50Hz
Working Temperature: -20~+40?
Ambient Light: 3-2000LUX (adjustable)
Working Humidity: <93%RH
Time-Delay: min: 10sec±3sec
Installation Height: 1.8m~2.5m
max: 8min±2min
Power Consumption: 0.45W (work)
Rated Load: 1200W (incandescent lamp) 0.1W (static)
300W(energy-saving lamp)
Detection Motion Speed?0.6~1.5m/s
Detection Distance: 5-12m (<24?) (adjustable)
FUNCTION :
? Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted to the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted to the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
? SENS adjustable: It can be adjusted according to using location; low sensitivity with 5m for
detection distance; high sensitivity with 12m, it fits a large room.
? Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).
? Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 8min±2min.
INSTALLATION :
? Switch off the power.
? Screw off the nail on the front cover. Open the wire hole. The power wire and the load wire are bored in the bottom.
? Fix the bottom on the selected position with the inflated screw.
? Connect the power and the load with the connection-wire column according to the connect-wire figure in the following part.
? Fix the front cover of the sensor, please screw the nail and switch on the power. So you can test it.
https://www.quicksense.in/collections/products/products/quick-sense-mini-microwave-sensor-360-180-degree?variant=36012103434399
The product is a new saving-energy switch; it adopts a microwave sensor mold with a high-frequency electromagnetic wave (5.8GHz), integrated circuit. It gathers automatism, convenience, safety, saving energy, and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion. When one enters the detection field, It can start the load at once and identity automatically day and night. Its installation is very convenient and its use is very wide. Detection is possible through doors, panes of glass, or thin walls.
Specifications
Power sourcing: 220V/AC-240V/AC
Detection Range: 360/108
Power Frequency: 50Hz Detection
Distance: 5-15m (radius) adjustable
Ambient Light 3-2000LUX (Adjustable)
HF system:5.8GHz CW radar, ISM band
Transmission Power: <10mW
Rated Load: 1200W
300W
Power consumption: approx 0.9W
Detection Motion Speed: 0.6-1.5m/sec
Switch the modes between cool and heat; Control temperature by setting the temperature set value and the different values; Temperature collaboration; Refrigerating control output delay protection; Alarm when the temperature exceeded temperature limit or when sensor error.
Specification and size
Technical parameters
Measured or otherwise detected, the passage of heat energy into or out of the space is adjusted to achieve a desired average temperature.
Input Specifications | Thermocouple:K,J,S,R ThermalResistance:Pt100,RTD |
Output Signal | Optional output |
Measurement Precision | 1.0 class (±1.0%F±1),0.5 class(±0.5%F+1) |
Regulating Methods | Intelligent PID control, according to the value of P,I,D parameters, we can get P(P=0 is on-off control),PI,PD,PID Regulating mode |
Alarm function (optional function) | The upper limit, Lower limit, Deviation value, Absolute value |
Contact Capacity(Resistive Load): AC250V2A | |
Power supply | AC85-AC265V 50/60 Hz |
Power Consumption | ≤10VA |
Working Conditions | Temperature:-10-50? |
Humidity: ≤85%RH non-corrosive environment |
Product | Electronic Siren - CAP 123 |
Tone | Standard Siren Tone |
Operating Voltage | 10.5 ~ 14.5Volt DC, Typical 12Volt DC |
Current | 500 mA (at 12V DC) |
Sound level | 115 dB at 1 Meter Distance (at 12V DC) |
Operating Temperature | -10° C to +50° C |
Continuous Operation | Maximum for 20 min at normal room temperature. |
Material of Housing | ABS 300 |
Color | Black + White |
Weight | 410 Gm (approximately with packing) |
Mounting Bracket | Material is M.S. (Adjustable mounting bracket). |
Frequency | 800Hz to 1200 Hz (at 12V DC) |
Dimension | 1100mm X 102mm X 68mm |
Proofing | Only Water spray proof |
Synchronization | Signal tone starts at zero point after every switching |
Warranty | One year against any manufacturing defects |
Our organization is occupied in manufacturing and supplying a wide array of Electronic Sirens, Piezo Sirens, Siren With Flasher, Motorized Siren, Magnetic Contacts, Panic Switch, Beacon Light, Backup Alarm, Water Overflow Alarm, Led Bulb, and Flasher Light. Designing of these sirens is carried out using top-grade basic material in accordance with the international quality parameters. These are extensively used in fairs, events, temples, and many other places to address the public. Our offered sirens are available in various sound levels according to the exact needs of the customers. These are valued for their excellent performance.
Product Specifications
Colour | Hooter 220V 111Db |
---|---|
Included Components | Electronic Siren |
Installation Type | Screw-In |
Material | Plastic |
Number of Items | 1 |
Part Number | PR18 |
Power Source Type | Electric |
Size | 220 V |
Product Specifications
Colour | 12V 400 m |
---|---|
Material | Plastic |
Number of Items | 1 |
Part Number | PR12_D |
Power Source Type | Electric |
Size | 12 V |
Specification Met | |
Warranty Description | 6 Months |
Specification for this product family
Brand Name | Quick Sense |
---|---|
Part Number | QS-HOOTER-P01-R |
Power Source Type | Electric |
---|---|
Size | 220 V |
Specification Met | |
Warranty Description | 6 Months |
Specification for this product family
Brand Name | Quick Sense |
---|---|
Part Number | QS-HOOTER-P01-R |
Tell us more about your requirements so that we can connect you to the right service provider.
An easy way to post your sourcing requests and get quotes. One request, multiple quotes
Will connect you with best sellers & provide you best quotation. Verified suppliers matching. Quotes comparison and sample request
Your local business too needs brand management and image making. As you know the local market..
165A, Ground floor, Ward no 5, bassa para, Olf faridabad, Faridabad - 121002,
Haryana, India.
Rishabh bansal (Rishabh bansal)
Requirement