2.5 inch / 63 mm Magnehelic Differential Pressure Gauge, For Clean Rooms

Minimum Order Quantity 10 Number

Brand Dwyer USA

Measuring Range 0-500 Pa

Model Name/Number Dwyer 2-5000-500PA

Usage/Application Industrial

Accuracy +-5% of FS at 70 DegreeF (21.1 DegreeC)

Temperature 20 to 120 Degree F (-6.67 to 48.9 Deg C)

Weight 6 oz (170.1 g)

Size 63 MM

Pressure Limits 30 psig (2.067 bar) continuous to either pressure connection

Dwyer 2-5000-500PA Minihelic II Differential Pressure Gauge 0-500 Pa

Housing Is Molded From Strong Mineral And Glass Filled Nylon. Pointer Stops of Molded Rubber Prevent Pointer Over Travel Without Damage.

Dwyer 2-5000-500pa Minihelic Ii, Differential Pressure Gauge, 0/500pa

Housing is molded from strong mineral and glass filled nylon.

Pointer stops of molded rubber prevent pointer over-travel without damage.

Full view lens is removable and molded of tough acrylic.

Aluminum scale litho-printed black on white, enhances readability.

Red tipped aluminum pointer, rigidly mounted to helix is easy to see.

Wishbone assembly provides mounting for helix, helix bearings, and pointer shaft.

Jewel bearings provide virtually friction-free helix motion.

Helix is free to rotate in jewel bearings. It aligns with magnetic field of magnet to transmit pressure indications to pointer.

Zero adjustment screw, located behind the removable lens, eliminates tampering.

Range spring calibration clamp fixes live length of spring for proper gauge calibration and is factory set and sealed.

Silicone rubber diaphragm allows accurate response to a broad range of temperatures and at extremely low pressure. Incorporates blow out area for overpressure protection.

Diaphragm support plates of lightweight aluminum on each side of the diaphragm minimize position or attitude sensitivity and help define pressure area.

Flat leaf range spring reacts to pressure on the diaphragm. Live length is adjustable for calibration. Small amplitude of motion minimizes inaccuracies and assures long life.

Low pressure tap connects to rear chamber.

Coil spring link provides a resilient connection between the diaphragm and the range spring.

Ceramic magnet mounted on a molded bracket at the end of the range spring rotates the helix without direct mechanical linkage.

High pressure tap connects with the front chamber through passageway in the plastic case and a sealing ring molded into the edgeof the diaphragm.

4 inch / 100 mm Magnehelic Differential Pressure Gauge, For HVAC System

Product Details:

Diameter 4-3/4"

Weight 1 lb. 2 oz.

Deep 2-3/16"

Finished Baked dark gray enamel

Thread Size 1/8" NPT plugs

Pressure Rating 15 PSI

Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client's end. Clients can avail the offered range from us at market leading prices within stipulated time frame.

Features:

Accuracy

High functionality

Long service life

Specifications:

We provide magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge

Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%

Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others

We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas

In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover

These have exterior finish with grey color to withstand 168 hour salt spray corrosion test

Technical Specifications:

Accuracy: ±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)

Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option

HP option: 35 psig (2.41 bar), 80 psig (5.52 bar)

Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only

Temperature Limits: 20 to 140°F.* (-6.67 to 60°C)

Size: 4 (101.6 mm) Diameter dial face

Mounting Orientation: Diaphragm in vertical position, Consult factory for

Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back

Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)

Other position orientations

Applications:

Filter Status

Duct Static Pressure

Clean Room Pressure

Building Pressure

Fan and Blower Pressure

Paint Booths

Dust Collectors

Glove Box Pressure

Bubbler Systems

Cabinet Purging

Magnehelic Differential Pressure Gauges 150 To 150 Pa

Product Details:

Diameter 4-3/4"

Weight 1 lb. 2 oz.

Deep 2-3/16"

Finished Baked dark gray enamel

Thread Size 1/8" NPT plugs

Pressure Rating 15 PSI

Having vast experience in the relevant industry, we are engaged in providing a broad assortment of Magnehelic Gauge that is assemble in order to meet specific demands of customers. Moreover, a series of quality tests is performed on offered gauge to ensure a defect free delivery at client's end. Clients can avail the offered range from us at market leading prices within stipulated time frame.

Features:

Accuracy

High functionality

Long service life

Specifications:

We provide magnehelic gauge of series which is low in cost, diaphragm operated and differential pressure gauge

Owing to these features these are used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%

Besides, these are also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others

We offer magnehelic differential pressure gauges which run on air and non-combustible compatible gases and are offered with the option of natural gas

In addition to this, these housing are fabricated by using die cast aluminum case and bezel, with acrylic cover

These have exterior finish with grey color to withstand 168 hour salt spray corrosion test

Technical Specifications:

Accuracy: ±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00, -60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)

Pressure Limits: -20 Hg. to 15 psig.† (-0.677 bar to 1.034 bar); MP option

HP option: 35 psig (2.41 bar), 80 psig (5.52 bar)

Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only

Temperature Limits: 20 to 140°F.* (-6.67 to 60°C)

Size: 4 (101.6 mm) Diameter dial face

Mounting Orientation: Diaphragm in vertical position, Consult factory for

Process Connections: 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back

Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)

Other position orientations

Applications:

Filter Status

Duct Static Pressure

Clean Room Pressure

Building Pressure

Fan and Blower Pressure

Paint Booths

Dust Collectors

Glove Box Pressure

Bubbler Systems

Cabinet Purging