Dwyer Magnehelic Differential Pressure Gauges 50 To 50 MMWC

Pressure Gages 50 to 50 MMWC

I Deal In New Only

Country of Origin Made in India

Color Black

Brand Dwyer USA

Dial Size 4'

Model Name/Number 2300-100MM

Measuring Range 50 to 50 MMWC

Display Type Analog

Diameter 100 MM

Type 2300-100MM

Connection New

Scale Range 50 To 50 MMWC

Usage/Application Industrial

Dwyer Magnehelic Differential Pressure Gauges 50 To 50 MMWC

Two 1/8" NPT Plugs, Two 1/8" Rubber Tubing Adapters, And Three Mounting Adapters With Screws

MORE ABOUT THIS ITEM

The Magnahelic Guage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems, and pressures in fluid amplifier or fluidic systems. The gauge's motion is damped with high-viscosity silicone fluid. The zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness. Rugged design resists shock, vibration, and overpressure.

The helix is precision-made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the maganetic field to move the pointer across the scale. The samarium cobalt magnet is mounted at one end of the range spring and rotates the helix without mechanical linkages.

Specifications & Description 

Accuracy ±2% full-scale

Dial Size (in) 4 

Dial Size (mm) 102 

Min Pressure (in WC) 0 

Max Pressure (in WC) 10 

Wetted Materials Aluminum

Case Aluminum

Lens Material acrylic

Process Connection 1/8" NPT

Unit Of Measurement " WC

Display analog dial

 Media Compatibility Gases and liquids compatible with wetted materials

 Resolution 0.20

 Description Magnehelic Differential Pressure Gauge, Type , 50-0-50 MM WC

E-mail :

dpsharma74@yahoo.co.in,

dpengineers007@yahoo.co.in,

info.dpengineers@yahoo.co.in

Mr D.P.SHARMA

9871014210

WhatsApp number :9871014210,9268631221

Websites :

www.dpengineers.in

www.dpengineer.in

www.dpengineers.co.in

www.dpengineer.co.in

www.dpengineersindia.com

www.dpengineerindia.com

www.dpengineersindia.in

www.dpengineers.info

www.dpengineer.info

www.dp-engineers.com

www.dpengineerindia.in

www.dpengineersindia.net

www.dpengineersdelhi.co.in

www.dpengineersdelhi.com

www.dp-engineers.co.in

www.dpengineersdelhi.net

https:www.youtube.com/watch?v=3KaLJsSV8Wo

https:www.youtube.com/watch?v=-O3rEhEyOzM

https:www.youtube.com/watch?v=mHle_D9SPnM

https:www.youtube.com/watch?v=Rl9dB5Uhl-c

https:www.youtube.com/watch?v=aU-cQCztS2s

https:www.youtube.com/watch?v=F9efnoISLw0

https:www.youtube.com/watch?v=SiYNp51HXbg

https:www.youtube.com/watch?v=EcY986bScqE

https:www.youtube.com/watch?v=LRgGmwyt_d0

Dwyer Magnehelic Gauge Range 15-0-15 Inches

Product Details:

Minimum Order Quantity 12 Number

Model Name/Number DWYER 2330

Weight 750 G

Connection Type NPT

Brand DWYER USA

Connection Size 1/8 inch

Dial Size 4 inch / 100 mm

Dial Type Dry

Display Type Analog

Mounting Back

Pressure Range MM WC, PAC,INCH,CM,KPA,PSI

Pressure Type Differential Pressure

Use Pharmaceutical Industries

Dwyer Magnehelic Gauge Range 15-0-15 Inches

Dwyer 2330 Magnehelic Differential Pressure Gauge (15-0-15"w.c.)

Model: 2330

Bezel Provides Flange For Flush Mounting in Panel. Clear Plastic Face is Highly Resistant To Breakage. Provides Undistorted Viewing Of Pointer And Scale.

Dwyer 2330 MAGNEHELIC, DIFFERENTIAL PRESSURE GAUGE, 15-0-15

Precision Litho-Printed Scale is Accurate and easy to read.

Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.

Pointer stops of molded rubber prevent pointer over-travel without damage.

"Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.

Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.

Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.

Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.

Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.

Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.

Silicone Rubber Diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.

Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test. Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.

Blowout plug of silicone rubber protects against overpressure on 15 psig rated models. Opens at approximately 25 psig.

O-Ring Seal For Cover Assures Pressure Integrity of case.

Dwyer 2330 Specifications

Service-Air And Non-Combustible,Compatible Gases,

May Be Used With Hydrogen

Pressures Must Be Less Than 35 PSI

Housing-Die Cast Aluminum Case And Bezel,With Acrylic Cover

Exterior Finish Is Coated Gray To Withstand 168 Hour Salt Spray Corrosion Test

Accuracy-±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM

±4% (-HA ±2%) on -00, -60PA, -6MM Ranges), Throughout Range at 70°F (21.1°C)

Pressure Limits--20 in Hg. to 15 psig.† (-0.677 bar to 1.034 bar)

MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar)

Enclosure Rating-IP67

Overpressure-Relief Plug Opens At Approximately 25 PSIG (1.72 bar), Standard Gages Only

Temperature Limits-20 to 140°F (-6.67 to 60°C)

-20°F (-28°C) With Low Temperature Option

Mounting Orientation-Diaphragm In Vertical Position

Process Connections-???" Female NPT Duplicate High And Low Pressure Taps - One Pair Side And One Pair Back

Dimensions-4" (101.6 MM) Diameter Dial Face

What's included with the Dwyer 2330

Dwyer 2330 Magnehelic Differential Pressure Gauge (15-0-15"w.c.)

E-mail :

dpsharma74@yahoo.co.in,

dpengineers007@yahoo.co.in,

info.dpengineers@yahoo.co.in

Mr D.P.SHARMA

9871014210

WhatsApp number :9871014210,9268631221

Websites :

www.dpengineers.in

www.dpengineer.in

www.dpengineers.co.in

www.dpengineer.co.in

www.dpengineersindia.com

www.dpengineerindia.com

www.dpengineersindia.in

www.dpengineers.info

www.dpengineer.info

www.dp-engineers.com

www.dpengineerindia.in

www.dpengineersindia.net

www.dpengineersdelhi.co.in

www.dpengineersdelhi.com

www.dp-engineers.co.in

www.dpengineersdelhi.net

https:www.youtube.com/watch?v=3KaLJsSV8Wo

https:www.youtube.com/watch?v=-O3rEhEyOzM

https:www.youtube.com/watch?v=mHle_D9SPnM

https:www.youtube.com/watch?v=Rl9dB5Uhl-c

https:www.youtube.com/watch?v=aU-cQCztS2s

https:www.youtube.com/watch?v=F9efnoISLw0

https:www.youtube.com/watch?v=SiYNp51HXbg

https:www.youtube.com/watch?v=EcY986bScqE

https:www.youtube.com/watch?v=LRgGmwyt_d0

Differential Pressure Gauge Nozzle SS 304

Packaging Type 100

Material Grade SS 304

Housing Material SS 304

I Deal In New Only

Material SS 304

Brand ETIP

Model Name/Number DP

Connection New

Usage/Application Magnehelic Gages-Differential Pressure Gauge

Differential Pressure Gauge Nozzle SS 304

As a Patron Centric Organization, We Provide Clients With The Premium Quality of Differential Pressure Gauge Nozzle. Used For Monitoring The Air Velocity Of Different Industrial Applications, The DP Gauge Nozzle Are Manufactured By Using Latest Technology. Compact Design, Sturdy Construction And High Functionality, Make The ETIP DP Gauge Nozzle highly Demanded.

Features:

Ideal For Air Velocity Monitoring Applications

Compact Design

Easy Operations And Calibrations

E-mail :

dpsharma74@yahoo.co.in,

dpengineers007@yahoo.co.in,

info.dpengineers@yahoo.co.in

Mr D.P.SHARMA

9871014210

WhatsApp number :9871014210,9268631221

Websites :

www.dpengineers.in

www.dpengineer.in

www.dpengineers.co.in

www.dpengineer.co.in

www.dpengineersindia.com

www.dpengineerindia.com

www.dpengineersindia.in

www.dpengineers.info

www.dpengineer.info

www.dp-engineers.com

www.dpengineerindia.in

www.dpengineersindia.net

www.dpengineersdelhi.co.in

www.dpengineersdelhi.com

www.dp-engineers.co.in

www.dpengineersdelhi.net

https:www.youtube.com/watch?v=3KaLJsSV8Wo

https:www.youtube.com/watch?v=-O3rEhEyOzM

https:www.youtube.com/watch?v=mHle_D9SPnM

https:www.youtube.com/watch?v=Rl9dB5Uhl-c

https:www.youtube.com/watch?v=aU-cQCztS2s

https:www.youtube.com/watch?v=F9efnoISLw0

https:www.youtube.com/watch?v=SiYNp51HXbg

https:www.youtube.com/watch?v=EcY986bScqE

https:www.youtube.com/watch?v=LRgGmwyt_d0