The stainless steel breakstem provides excellent bulbing tail formation and high shear and tensile strength.  This industrial fastener’s stainless steel construction provides good corrosion resistance in applications subject to elevated temperatures.

Key Features & Benefits :

• Ideal for use in thin sheet materials
• Compensates for irregular, oversized, slotted or misaligned holes
• Good hole fill
• Can stop movement in non-standard holes
• Provides strong, vibration resistant joints
• High corrosion resistance
• High shear and tensile strength
• Provides a large blind side bearing area against the rear sheet
• Retained stem
• Ideal for applications requiring elevated temperatures
• Spreads the tail bearing load/clamp load on the rear sheet
• No damage, electrical problems or rattling due to loose stems

Assembly Materials :

• Hydranox can be used to fasten:
• Metal to metal
• Plastic to plastic
• Metal to plastic
• Metal rear sheet

Assembly Applications :

• Automotive
• Cabinets and enclosures
• Heating and ventilating
• Telecommunications

Specifications :

• Sizes: 3.2mm to 4.8mm (1/8" to 3/16")
• Materials: stainless steel
• Head forms: Dome Head

The steel breakstem provides excellent bulbing tail formation and high shear and tensile strength. 

Key Features & Benefits :

• Ideal for use in thin sheet materials
• Compensates for irregular, oversized, slotted or misaligned holes
• Good hole fill
• Can stop movement in non-standard holes
• Provides strong, vibration resistant joints
• High shear and tensile strength
• Provides a large blind side bearing area against the rear sheet
• Retained stem
• Ideal for applications requiring elevated temperatures
• Spreads the tail bearing load/clamp load on the rear sheet
• No damage, electrical problems or rattling due to loose stems

Assembly Materials :

• Metal to metal
• Plastic to plastic
• Metal to plastic
• Metal rear sheet

Assembly Applications :

• Automotive
• Cabinets and enclosures
• Heating and ventilating
• Telecommunications

Specifications :

• Sizes: 3.2mm to 6.0mm
• Materials: Steel
• Head forms: Dome Head

This also allows for a wide variation in material thickness. The Hydrasoft blind breakstem fastener is ideal for use with plastic and low strength material.

Key Features & Benefits :

• Multi-grip capability
• Split tail formation provides a very large blind side bearing area against the rear sheet
• Retained stem
• Wide choice of installation tools
• One fastener can often be used to replace several standard grip fasteners
• Accommodates wide variations in material thickness
• Reduced fastener inventory and simpler stock control
• Spreads the tail bearing load/clamp load on the rear sheet
• No damage, electrical problems or rattling due to loose stems

Assembly Materials :

• Metal to metal
• Plastic to plastic
• Metal to plastic
• Metal rear sheet

Assembly Applications :

• Caravans
• Domestic appliances

Specifications :

• Sizes: 4.0mm and 4.8mm (5/32" and 3/16")
• Material: Aluminium alloy
• Head form: Dome, large flange

The structural Hydratite rivet contains a visible mechanical lock to give extra strength to the joint.

Key Features & Benefits :

• Split tail formation spreads the tail bearing load/clamp load on the rear sheet
• Ideal for use in thin sheet materials offering high resistance to pull-out loads
• Multi-grip capability accommodates wide variations in material thickness
• Ideal for use in very soft or brittle materials
• Stem is mechanically locked into body providing very strong, vibration resistant joints
• Visible lock for quick and easy inspection
• Optional under head washer provides a weather-proof seal

Assembly Materials :

• Metal to metal
• Plastic to plastic
• Metal to plastic

Assembly Applications :

• Domestic appliances
• Plastic components
• Automotive plastic assemblies
• Container
• Cladding
• Commercial vehicles

Specifications :

• Sizes: 4.8 mm and 6.4 mm (3/16" and 1/4")
• Material: Aluminium alloy
• Head form: Protruding

Key Features & Benefits :

• ‘Peel-type’ tail formation makes it ideal for joining metal to wood, board or low density plastic.
• Large bearing surface expands into blind hole providing superior pull-out force.
• Ideal replacement for wood screws or self-tapping screws.
• Multi-grip capability accommodates wide variations in material thickness.

Assembly Materials :

• Wood
• Board
• low density plastic

Assembly Applications :

• Garage doors
• Furniture

Specifications :

• Sizes: 4.3 mm and 4.8 mm (3/16")
• Materials: Steel
• Head forms: Dome

The Hydrahem rivet features an interference lock ensuring the strongest vibration resistant joints. Creates a large blind side bearing area spreads the load and prevents creep.

Key Features & Benefits :

• Exceptional shear and tensile strength
• Large blind side bearing area against the rear sheet
• Interference lock formed by a splined stem
• Spreads the tail bearing/clamp load on the rear sheet
• Ideal for thin sheet materials
• Provides strong, vibration resistant joints
• No damage, electrical problems or rattling due to loose stems

Assembly Materials :

• Metal to metal
• Metal to plastic
• Thin sheet Thick Metal

Assembly Applications :

• Automotive
• Warehouse racking
• Ladders

Specifications :

• Sizes: 6.4mm(1/4”)
• Materials: Steel
• Head forms: Dome Head

Hybolt MB blind rivets are designed and developed for demanding applications where safety and performance is paramount to the customer demands.

Key Features & Benefits :

• Multi-grip capability
• High shear and tensile strength
• Good sheet take-up performance
• Visible lock for quick and easy inspection
• Excellent hole fill via rapidly expanded body
• Stem mechanically locked into body
• One fastener can be used to replace several standard grip fasteners
• Reduced fastener inventory and simpler stock control
• Compensates for irregular, oversized, slotted or misaligned holes
• Can stop sheet movement in non-standard holes
• Large gap closing capability
• Provides very strong, vibration resistant joints
• No damage, electrical problems or rattling due to loose stems

Assembly Materials :

• Metal to metal
• Metal to plastic

Assembly Applications :

• Automotive
• Cabinets and enclosures
• Commercial vehicles
• Domestic appliances
• Heating and ventilating
• Marine and hospital environments

Specifications :

• Sizes: 4.8mm, 6.4mm and (3/16", ¼”)
• Materials: Aluminium alloy, steel and stainless steel
• Head forms: Protruding and countersunk

The Hybolt IL rivet can close large gaps and prevent sheet movement and give high shear and tensile strength enable the use of fewer Interlock rivets per assembly.

Key Features & Benefits :

• Multi-grip capability
• High shear and tensile strength
• Good sheet take-up performance
• Excellent hole fill via radially expanded body
• Stem mechanically locked into body
• One fastener can be used to replace several standard grip fasteners
• Reduced fastener inventory and simpler stock control
• Compensates for irregular, oversized, slotted or misaligned holes
• Can stop sheet movement in non-standard holes
• Large gap closing capability
• Provides very strong, vibration resistant joints
• No damage, electrical problems or rattling due to loose stems

Assembly Materials :

• Metal to metal
• Metal to plastic

Assembly Applications :

• Automotive
• Cabinets and enclosures
• Commercial vehicles
• Domestic appliances
• Heating and ventilating

Specifications :

• Sizes: 4.8mm, 6.4mm (3/16", 1/4")
• Materials: Aluminium alloy, Steel and Stainless Steel
• Head forms: Dome and countersunk

Key Features & Benefits :

• Resistant to pressure and water ensures leak resistant assembly.
• Restrains corrosion. Improves life of the Joint/ Component.
• Complete hole fill capability.
• Ensures high strength and vibration resistant assembly.
• Eliminates possibility of loose stems and prevents damage to component.
• Can be used with different installation equipment’s.
• Variety of lengths and diameters available.

Assembly Materials :

• Metal to metal
• Metal to plastic
• Metal rear sheet

Assembly Applications :

• Automotive
• Commercial vehicles
• Domestic appliances
• Electronics
• Electrical equipment
• General light industrial
• Heating and ventilating

Specifications :

• Sizes: 3.2mm (1/8”), 4.0 mm (5/32) and 6.4mm (1/4”)
• Material: Aluminium,Steel,Stainless Steel
• Head form: Dome, Countersunk Head

Fastening cost is low, Due to high speed and ease of application. Strong, reliable, vibration proof assemblies can be made without operator skills and rivet can be installed without marking the surface of the work piece.

Key Features & Benefits :

• Hydrapop is a Uni-grip rivet and comes in wide range of diameters and lengths
• Allows versatility in various applications.
• Countersunk head available which gives flush finish to work surface.
• Large flange head available enables to use in softer materials.
• Good Hole fill ensures high strength joints even in oversize and misaligned holes.
• Ideal for use in thin sheet materials.
• Require one side access for installation.
• High speed installation
• Available in various material combinations

Assembly Materials :

• Metal to metal
• Plastic to plastic
• Metal to plastic

Assembly Applications :

• Automotive
• Commercial vehicles
• Domestic appliances
• Electronics
• Electrical equipment
• General light industrial
• Heating and ventilating

Specifications :

• Sizes: 2.4mm to 6.4mm
• Materials: Aluminium, Steel, Stainless Steel
• Head forms: Dome, Large Flange, Counter Sunk.

Produced in either Aluminium Steel or stainless steel to meet your requirements, this blind rivet can replace several grip fasteners. With good hole fill and a large bulbing tail, this rivet is ideal for use on thin sheet materials.

Key Features & Benefits :

• Multi-grip capability
• Superior hole fill
• High shear and tensile strength
• provides a large blind side bearing area against the rear sheet
• Retained stem
• Stainless steel option provides high corrosion resistance and is ideal for applications requiring elevated temperatures
• Wide choice of installation tools
• One fastener can be used to replace several standard grip fasteners
• accommodates wide variations in material thickness
• Reduced fastener inventory and simpler stock control
• Spreads the tail bearing load/clamp on the rear sheet
• Ideal for use in thin sheet materials
• Compensates for irregular, oversized, slotted or misaligned holes
• Can stop sheet movement in non-standard holes
• provides strong, vibration resistant joints
• No damage, electrical problems or rattling due to loose stem

Assembly Materials :

• Metal to metal
• Plastic to plastic
• Metal to plastic
• Metal rear sheet

Assembly Applications :

• Automotive
• Commercial vehicles
• Domestic appliances
• Electronics
• Electrical equipment
• General light industrial
• Heating and ventilating

Specifications :

• Sizes: 3.2mm to 4.8mm (1/8" to 3/16")
• Materials: Aluminium, Steel and stainless steel
• Head forms: Dome, countersunk and large flange