Product Introduction :

The large flange version gives the Thin Sheet Nutsert rivet nut a greater load-bearing surface whilst a closed-end prevents the access of dirt and fluids into the thread and electrical circuits 

Key Features & Benefits :

Can be used in very thin sheet materials from 0.50mm (0.02")
Access needed from only one side of the application, for high speed assembly
Provides a female thread in application
Can be installed in pre-coated or post painted applications without damaging the surface
Various plating’s available to increase the corrosion resistance
Low profile head allows near flush fit to application and clamps two or more sheets of material together, Within the grip range
Large flange head provides a load bearing surface and reinforces the hole to prevent push-out.
Can be used as a spacer and can be supplied with an under-head seal
Closed end prevents the ingress of dirt and fluids into thread and electrical circuits
Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly.

Assembly Applications :

Automotive
Electrical engineering
Electronic components
Sheet metal
Domestic appliances
General light fabrication
Specifications :

Thread Sizes: M3-M12
Materials: Aluminium, Steel, Stainless Steel
Finishes : Zinc-plated and clear trivalent passivated
Head forms: Low profile, countersunk and large flange
Option: Closed end
Hole Size: Mainly imperial & metric options.

Product Introduction :

Hydranut SPL is a blind threaded nut insert with a round & splined body thus offering higher torque to turn ratio. They are available in Steel and Aluminium and provide load-bearing threads in thin sheet materials.

Key Features & Benefits :

• Can be used in very thin sheet materials from 0.50mm (.020").
• Wide grip range provides a placing capability in material thickness ranging from 0.5 mm (.020") up to 7.9 mm (.312")
• Splined body provides increased torque-to-turn resistance over conventional non-splined inserts
• Low profile head allows near flush seating without special hole preparation
• Large flange version provides a large bearing surface which increases push-out performance
• Reduced tail end diameter offers ease of hole entry

Assembly Applications :

• Automotive
• Electrical engineering
• Sheet metal
• Domestic appliances
• General light fabrication

Specifications :

• Thread Sizes: M4 – M10,
• Materials: Steel, Aluminium
• Headforms: Low profile and large flange
• Body:  Splined

Product Introduction :

The Hydranut SQR rivet has a large flange to increase the load-bearing surface allowing the Hydranut SQR to be used in thin sheet materials.

Key Features & Benefits :

• Square section and bore improves torque-to-turn by up to 350% in sheet metal compared to round body inserts
• Increases punch life compared to hexagonal geometries
• Superior pull-out performance
• Can be used for very thin sheet materials from 0.50mm (0.02")
• Access needed from only one side of the application, for high speed assembly
• Provide a female thread in application
• Can be installed in pre-coated or post painted applications without damaging the surface
• Clamp two or more sheets
• Various plating’s available to increase corrosion resistance
• Large flange head provides a load bearing surface and reinforces the hole to prevent push-out
• Can be used as a spacer and can be supplied with an under head seal
• Can be used with hand tools, pneumatic tools and fully automated machines to suit  a wide range of assembly

Assembly Applications :

• Automotive body mountings
• Electrical enclosures
• Soft sheet metal
• Plastics & composites
• Domestic appliances
• General light fabrication

Specifications :

• Thread Sizes: M5-M8
• Material: Steel
• Finishes: Zinc plated and clear trivalent passivated
• Headform: Large flange

Product Introduction :

Hydranut HHX is a blind threaded nut insert with a hexagonal profile on the half body designed to provide high torque-to-turn and pull-out performance, particularly in soft metals.

Key Features & Benefits :

• Hexagonal section and bore improves torque-to-turn by up to 200% in sheet metal compared to round body inserts
• Superior pull-out performance
• Can be used for very thin sheet materials from 0.50mm (0.02")
• Double diameter body and lead-in chamfer provide easy insertion into hole
• Access needed from only one side of the application, for high speed assembly.
• Provide a female thread in application
• Can be installed in pre-coated or post painted applications without damaging the surface Various plating available to increase corrosion resistance
• Large flange head provides a load bearing surface and reinforces the hole to prevent push-out, that can be used as a spacer and can be supplied with an under head seal.
• Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods.

Assembly Applications :

• Automotive chassis components
• Electrical engineering
• Sheet metal
• Domestic appliances
• Switchgear cabinets
• Thermal applications

Specifications :

• Thread Sizes: M3-M10
• Material: Steel, stainless steel
• Finishes Steel: Zinc plated and clear trivalent passivated
• Head forms: Low profile and large flange
• Option: Closed end
• Hole Size: Mainly imperial & metric options

Product Introduction :

The large flange version gives the Thin Sheet Nutsert rivet nut a greater load-bearing surface and closed-end prevents the access of dirt and fluids into the thread and electrical circuits. 

Key Features & Benefits :

• Can be used in very thin sheet materials from 0.50mm (0.02")
• Access needed from only one side of the application, for high speed assembly
• Provides a female thread in application
• Can be installed in pre-coated or post painted applications without damaging the surface
• Various plating’s available to increase the corrosion resistance
• Low profile head allows near flush fit to application and clamps two or more sheets of material together, within the grip range
• Large flange head provides a load bearing surface and reinforces the hole to prevent push-out.
• Can be used as a spacer and can be supplied with an under-head seal
• Closed end prevents the ingress of dirt and fluids into thread and electrical circuits
• Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods

Assembly Applications :

• Automotive
• Electrical engineering
• Electronic components
• Sheet metal
• Domestic appliances
• General light fabrication

Specifications :

• Thread Sizes: M3-M10
• Materials: Steel, stainless steel, aluminium
• Finishes : Zinc plated and clear trivalent passivated
• Head forms: Low profile, countersunk and large flange
• Hole Size: Mainly imperial & metric options.

Product Introduction :

Hydranut HHX is a blind threaded nut insert with a hexagonal profile on the half body designed to provide high torque-to-turn and pull-out performance, particularly in soft metals.

Key Features & Benefits :

• Hexagonal section and bore improves torque-to-turn by up to 200% in sheet metal compared to round body inserts
• Superior pull-out performance
• Can be used for very thin sheet materials from 0.50mm (0.02")
• Double diameter body and lead-in chamfer provide easy insertion into hole
• Access needed from only one side of the application, for high speed assembly.
• Provide a female thread in application
• Can be installed in pre-coated or post painted applications without damaging the surface Various plating available to increase corrosion resistance
• Large flange head provides a load bearing surface and reinforces the hole to prevent push-out, that can be used as a spacer and can be supplied with an under head seal.
• Can be used with hand tools, pneumatic tools and fully automated machines to suit a wide range of assembly methods.

Assembly Applications :

• Automotive chassis components
• Electrical engineering
• Sheet metal
• Domestic appliances
• Switchgear cabinets
• Thermal applications

Specifications :

• Thread Sizes: M3-M10
• Material: Steel, stainless steel
• Finishes Steel: Zinc plated and clear trivalent passivated
• Head forms: Low profile and large flange
• Option: Closed end
• Hole Size: Mainly imperial & metric options